PRE AND POST THERMAL FOGGING TESTING
COV-RID in collaboration with Scientific Services offer high quality scientifically proven Pre and Post fogging testing to guarantee the thermally fogged location is clean and disinfected.
Let us help you show your clients just how clean and disinfected your facilities are after Thermal Fogging with COV-RID High Level Disinfectant
We offer testing that will provide you with a fast, scientifically proven and safe method to evidence the reduction in Bacteria in your facilities as a result of the extra measures you have put in place to make your facility COVID free and safe for people to use.
FAST
The tests we undertake use contact plates which make the test very fast to undertake. Using contact plates you can take a reading within 10 seconds.
SCIENTIFICALLY PROVEN
All the contact plates are taken to be tested at a laboratory that has been BSEN approved. All the contact plates are rigorously tested to the highest standards.
SAFE
There is no risk involved in collecting samples using contact plates. The plates use a sterile substance designed to collect the bacteria from surfaces it touches.
THE SIMPLICITY OF TESTING IS SHOWN BELOW IN THE 4 STEPS
STEP 1
Take contact plate readings from around the room you are about to clean and thermally fog with COV-RID High Level Disinfectant Fogging Solution. This is a very quick process and the contact plates can be used to take readings on any type of surfaces. The contact plates will only collect the bacteria already on the surface and will not leave anything behind.
STEP 2
After taking the readings around the room with the contact plates, clean the room as you normally would and then thermally fog the room with COV-RID High Level Disinfectant. Leave the room and let the fog dissipate, making sure the 100% of the exposed surfaces are covered with COV-RID High Level Disinfectant Fogging Solution.
STEP 3
Once the fog has dissipated from the room re enter and re take contact plate readings from the same locations where you had previously taken recordings. These contact plate readings will show you the difference in bacteria and fungus from before and after fogging with COV-RID high Level Disinfectant Fogging Solution.
STEP 4
The contact plates will be sent back to our laboratory and tested. The plates will be incubated for 72 hours to provide an accurate analysis of the bacteria before and after. You will be provided with an official report detailing the outcome of the bacteria testing which you will be free to do with as you please.
Scientifically proving that you have cleaned and disinfected your location, whether it be a Car or a Hotel Room, can be the difference between a customer choosing you over your competitor.
BOOK YOUR FOGGING TRIAL AND BACTERIA TEST NOW
We are ready to hear from you and help you learn how COV-RID High Level Disinfectant Thermal Fogging can keep you and your customers safe from COVID-19. We can talk to you further about how we would undertake the bacteria tests and answer any further questions you might have.
